Mounted on rubber-tyres and normally with front-wheel steering, greater manoeuvrability has been achieved with these shovels in recent years by use of articulation. Most of the larger models today are of this type. Whereas smaller units are commonly used to load lorries and rail-wagons and for general yard duties, larger units are becoming common for face-loading of dump trucks and 'load-and-carry' operations. This machine is extremely versatile but is limited by maintenance costs and tyre wear (in abrasive 'hard' rock quarries) and ground conditions (unsuitable for wet, soft conditions).
- Basalt Crushing and Sand Making Production Line
The production line of basalt materials processing can mainly be divided into 3 stages: primary crushing, secondary crushing, sand making & shaping, respectively. Because the real size of the raw basalt material and the desirable size of end product o...
- Concrete Solution for AAC Block Plant
Aerated concrete block is an important kind of construction material and it is mainly composed of cement, gravel, fly ash, lime and foaming agent. It possesses the advantages of light weight, fire prevention, thermal insulation,noise insulation...
- Sand and Gravel Processing Plant
A cone crusher is depicted as most suitable to crush very coarse rejects into the desirable size range of concrete aggregates. A ZS vertical shaft impactor may be used to increase the yield of sand....
- High Performance Concrete Production Line
High performance concrete is made through conventional technology and its strength grade is from C50~C80. It is composed of cement, sand, stone, superplasticizer and other additives, fly ash, superfine slag, silica fume and other mineral admixtures....
- The Aggregates Production Line for Highway Construction
In the production line, Camelway technical staffs mainly configure the vibrating feeder, jaw crusher, hydraulic cone crusher, circular vibrating screen, vertical shaft impact crusher(sand making machine), belt conveyor, etc....