Home > Encyclopedia

Prevention and Treatment of Common Problems in Concrete Mixing Plant

Fracture of belt interface and transverse tear in the process of belt conveying at a concrete mixing plant    

Reason: The treatment of joint vulcanization is unqualified; (instantaneously) the impact load is too large, the vulnerable area is affected by the alternating stress and cause break. The direction of the interface does not adapt to the direction of belt movement; life-time service, and fatigue damage.

Harm: Severe damage to the belt

Prevention and solution: Minimize the load, especially the belts with counterweight tensioning device, the weight should be controlled within 200kg~300kg; Strengthen inspections, prevent foreign material from sticking the belt and scratching the belt; Strengthen the training of the belt assembly personnel, prevents the direction of the belt interface from being reversed.

Ashing Problem of Cement Silo in Concrete Batching Plant

Reason: The filter element of dust collector is blocked. When pumping powder, The pressure in the cement silo rises, when rises to the adjustment pressure of the safety pressure valve at the top of silo, safety valve opens, the ash gas escapes from the safety valve, cause silo roof ashing.

Prevention and solution: Before pumping powder, start the deduster vibrator of silo roof for 1~2min, shake off the dust. In addition, cleaning the filter element and safety valve regularly.

>>Previous: Mixing System of Concrete Batching Plant

>>Next: None

Get Support & Quotation

Please fill in the form below(* are required), and we will get in touch with you as soon as possible.

Batching Plant Concrete Mixer Crusher Other

Solution

  • Andesite Manufactured Sand Production LineAndesite Manufactured Sand Production Line

    The Andesite Manufactured Sand Production Line designed by Camelway Machinery has the advantages of reasonable configuration, high automation degree, low operation cost, high crushing ratio, low energy consumption, high productivity and simple maintenance...

  • Mobile Crushing Plant for Construction Waste ProcessingMobile Crushing Plant for Building Waste Processing

    Due to the construction wastes usually were piled up concentratedly in relatively limited space with poor traffic condition, Camelway Machinery recommends wheel mobile crushing equipment to crush and screen the construction waste....

  • Diabase Crushing, Screening and Sand Making Production LineDiabase Crushing, Screening and Sand Making Production Line

    Diabase is a superior building material that can be used as asphalt concrete crushed stones for super highway pavement. The production mainly consists of jaw cr...

  •  High Performance Concrete Production LineHigh Performance Concrete Production Line

    High performance concrete is made through conventional technology and its strength grade is from C50~C80. It is composed of cement, sand, stone, superplasticizer and other additives, fly ash, superfine slag, silica fume and other mineral admixtures....

  • Hard rock Crushing Plant, Roadstone Processing PlantHard rock Crushing Plant

    The following figure depicts the flowsheet for a plant producing various forms of dry (uncoated) roadstone including high PSV (+60) surface chippings. The produ...

Contact Us

Tel: 008637165861518

Fax: 008637165861528

E-mail:info@camelway.com

Mobile: 008618838109566

WhatsApp: 008618838109566

Skype: Camelway1983