Home > Encyclopedia

What is the Commercial Concrete Plant?

The Commercial Concrete Plant consists of mixing system, aggregate bin, fly ash storage silo, metering system, control system and other components. It is usually as a permanent facility used for producing high quality commercial concrete. With the fully enclosed design and automation technology, Commercial Concrete Plant owns the advantages of environmental-protection, energy-saving, high-efficiency, stability and safety.

Mixing System:

Due to uniform mixing and high productivity, mixing system usually uses a twin-shaft compulsory mixer. It has good mixing effect on dry hard, semi-dry, plastic and various proportions of concrete. The hydraulic opening mechanism of the mixer can adjust the opening degree of the discharge door as needed.

Introduction of electronic control system

The electronic control system is composed of two high-performance industrial computers, one is used as the main control production system, and the other is used as the management and monitoring system.

Metering system

The metering system is a key component that affect the quality of concrete and the cost of concrete production. It is mainly divided into three parts: aggregate weighing, powder weighing and liquid weighing. In generally, the batching plant below 20 cubic meters per hour adopts the superposition weighing method, that is, the aggregate (sand, stone) is weighed with a scale, the cement and the fly ash are weighed with a scale, water and liquid admixture. In the batching plant that is more than 50 cubic meters per hour, we usually use the method of weighing each material independently, and all weighing is controlled by electronic scale and microcomputer.

>>Previous: Environmental Issus Concrete Batching Plants

>>Next: Engineering Concrete Plant

Get Support & Quotation

Please fill in the form below(* are required). We will get in touch with you ASAP!

Concrete Plant Concrete Mixer Crusher Other


  • Diabase Crushing, Screening and Sand Making Production LineDiabase Crushing, Screening and Sand Making Production Line

    Diabase is a superior building material that can be used as asphalt concrete crushed stones for super highway pavement. The production mainly consists of jaw cr...

  • Aggregate Production,Basalt Crushing and Sand Making LineBasalt Crushing and Sand Making Production Line

    The production line of basalt materials processing can mainly be divided into 3 stages: primary crushing, secondary crushing, sand making & shaping, respectively. Because the real size of the raw basalt material and the desirable size of end product o...

  • Mason Sand Making Solution, Plaster Sand Making Plant, Sand Crushing PlantMason Sand Making Solution

    Mason Sand is also called as Plaster Sand, one type of important building material in construction industry. Mason sand has a maximum particle size of 9.5 mm, a...

  • Mobile Crushing Plant for Construction Waste ProcessingMobile Crushing Plant for Building Waste Processing

    Due to the construction wastes usually were piled up concentratedly in relatively limited space with poor traffic condition, Camelway Machinery recommends wheel mobile crushing equipment to crush and screen the construction waste....

  • Limestone Crushing,Limestone Crushing LineLimestone Crushing Line

    The compressive strength of limestone is generally about 150 MPa under the category of soft rock, hence, in the selection of limestone crushing technology, adop...

Contact Us

Tel: 008637165861518

Fax: 008637165861528


Mobile: 008618838109566

WhatsApp: 008618838109566

Skype: Camelway1983