Home > Encyclopedia

Operation method of concrete mixing station

concrete mixing station

First, before using check whether the power supply is normal; check whether lubrication, electrical appliances and mechanical parts are normal. If there is any abnormal situation, timely feed back to equipment maintenance department and related personnel to deal with. After confirming the machine run properly, add materials then work.

Next, when working, raw materials shall not poured exceed the maximum capacity of concrete mixer, avoid damage the motor; Attention: hand is strictly prohibited to cylinder in the process of mixing, same to other items. while working, close computer cover, fasten a card buckle cover, connect to the power supply, set the timer, and press button of shipment. After alarm time, batching machine can discharge materials, and it is prohibited to charge materials during operation process.

After finishing operation, operator must shut off the power, then clean up the mixing cylinder and chassis parts; When the operator is not at the table, he must cut off power supply, stop the operation of the machine, if someone finds the machine failure or abnormal operation in the working process, cut off power supply, stop it immediately, then ask relevant personnel to maintain.

>>Previous: None

>>Next: Fly ash in Concrete Batching Plant

Get Support & Quotation

Please fill in the form below(* are required), and we will get in touch with you as soon as possible.

Batching Plant Concrete Mixer Crusher Other

Solution

  • Mobile Crushing Plant for Construction Waste ProcessingMobile Crushing Plant for Building Waste Processing

    Due to the construction wastes usually were piled up concentratedly in relatively limited space with poor traffic condition, Camelway Machinery recommends wheel mobile crushing equipment to crush and screen the construction waste....

  • Aggregate Production,River Pebble or Cobblestone Sand Manufacturing LineRiver Pebble or Cobblestone Sand Manufacturing Line

    The manufactured sand made of river pebble materials has a wide applications in cement concrete, asphalt concrete and various soil cement (stabilized soil) materials and other road, tunnel, bridge and culvert engineering projects....

  •  High Performance Concrete Production LineHigh Performance Concrete Production Line

    High performance concrete is made through conventional technology and its strength grade is from C50~C80. It is composed of cement, sand, stone, superplasticizer and other additives, fly ash, superfine slag, silica fume and other mineral admixtures....

  • Limestone Crushing,Limestone Crushing LineLimestone Crushing Line

    The compressive strength of limestone is generally about 150 MPa under the category of soft rock, hence, in the selection of limestone crushing technology, adop...

  • Granite Crushing,Granite Crushing LineGranite Crushing Line

    The Granite Crushing Line designed by Camelway has the advantages of high automation degree, high crushing capacity, low operation cost, low energy consumption and qualified environmental protection performance, and the end products it produced has a good...

Contact Us

Tel: 008637165861518

Fax: 008637165861528

E-mail:info@camelway.com

Mobile: 008618838109566

WhatsApp: 008618838109566

Skype: Camelway1983