Home > Encyclopedia

Soil Cement

soil cement construction

Soil-cement is a kind of common but important mixture of soil/aggregate, measured portland cement and water to be used as low-cost pavement base for roads, residential streets, parking areas, airports, shoulders, and materials-handling and storage areas. There are also some people regarding it as cement-stabilized base or cement-treated aggregate base. Except for low cost, it also has the features of high strength and durability. Camelway WBZ/YWBZ soil cement batch plant can produce high quality soil cement to meet various construction requirements.

Cement-Modified Soil (CMS), Cement-Treated Base (CTB) and Full-Depth Reclamation (FDR) are 3 different types of soil-cement materials.

CMS is a kind of soil materials modified by adding a relatively small proportion of portland cement to improve its undesirable physical properties, so it can meet the construction requirements. The degree of improvement can be controlled according to the quantity of cement added and the type of soil. If you add varying amounts of cement, you will get CMS with different physical properties to satisfy various demands. Depending on the predominant grain size, CMS can usually be classified into two groups: Cement-modified silt-clay soils (contain more than 35 percent silt and clay ) and Cement-modified granular soils (contain less than 35 percent silt and clay ). Note: Particle size between 0.002-0.075㎜ is named silt while less than 0.002㎜ is called clay.

soil cement pavement materials

CTB is an intimate mixture of aggregate material(or granular soils), portland cement and water. In order to produce a durable paving material in accordance with construction standard, you should pay more attention to precisely measuring the amounts of portland cement and water. When the materials are properly compacted and cured, CTB is formed and can support a bituminous or portland cement concrete surface to complete the pavement structure. It is widely used in highways, roads, streets, parking areas, airports, and materials handling and storage areas as their bases.

FDR is a kind of recycled soil materials to rebuild worn out asphalt pavements by using the deteriorated asphalt surface, base and sub-base materials. The production process of CTB is: After the original asphalt surface and base materials are pulverized, they will be mixed with some cement and water to create a new stabilized base. It is one economical and environmental way to rebuild the existing roads.

Soil cement is a very important paving material, and Camelway Machinery can provide you with WBZ stationary & YWBZ mobile soil cement mixing plant and a whole set of pavement solution.

>>Previous: The difference between Concrete and Cement

>>Next: Aggregates in Concrete

Get Support & Quotation

Please fill in the form below(* are required), and we will get in touch with you as soon as possible.

Concrete Plant Concrete Mixer Crusher Other

Solution

  • Diabase Crushing, Screening and Sand Making Production LineDiabase Crushing, Screening and Sand Making Production Line

    Diabase is a superior building material that can be used as asphalt concrete crushed stones for super highway pavement. The production mainly consists of jaw cr...

  • Mobile Crushing Plant for Construction Waste ProcessingMobile Crushing Plant for Building Waste Processing

    Due to the construction wastes usually were piled up concentratedly in relatively limited space with poor traffic condition, Camelway Machinery recommends wheel mobile crushing equipment to crush and screen the construction waste....

  • Aggregate Production,Basalt Crushing and Sand Making LineBasalt Crushing and Sand Making Production Line

    The production line of basalt materials processing can mainly be divided into 3 stages: primary crushing, secondary crushing, sand making & shaping, respectively. Because the real size of the raw basalt material and the desirable size of end product o...

  • Limestone Crushing,Limestone Crushing LineLimestone Crushing Line

    The compressive strength of limestone is generally about 150 MPa under the category of soft rock, hence, in the selection of limestone crushing technology, adop...

  • Concrete Solution for AAC Block PlantConcrete Solution for AAC Block Plant

    Aerated concrete block is an important kind of construction material and it is mainly composed of cement, gravel, fly ash, lime and foaming agent. It possesses the advantages of light weight, fire prevention, thermal insulation,noise insulation...

Contact Us

Tel: 008637165861518

Fax: 008637165861528

E-mail:info@camelway.com

Mobile: 008618838109566

WhatsApp: 008618838109566

Skype: Camelway1983